|
DESCRIPTION: Nation™ Dreamcoat™ Latex is a budget-friendly, water-based paint. It is the ideal choice for quality at an affordable price.
PRINCIPAL USES: It is ideal for interior concrete, bricks, plaster, and drywalls.
FINISH:
N-1540: Flat
N-1541: Gloss
DRY TIME:
N-1540
Touch: 30 minutes
Recoat: 1 hour
N-1541
Touch: 1 hour
Recoat: 2 hours
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity
TINTING: Will accept BOYSEN® Latex Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B-1466 Hansa Yellow and B-1407 Toluidine Red are for interior painting only.
THINNING SOLVENT: Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4-Liter can.
CLEAN-UP SOLVENT: Water
PACKAGING: 1-Liter, 4-Liters, and 16-Liters
APPLICATION: By brush or roller
|
|
DESCRIPTION: Nation™ Dreamcoat™ Latex is a budget-friendly, water-based paint. It is the ideal choice for quality at an affordable price.
PRINCIPAL USES: It is ideal for interior concrete, bricks, plaster, and drywalls.
FINISH:
N-1540: Flat
N-1541: Gloss
DRY TIME:
N-1540
Touch: 30 minutes
Recoat: 1 hour
N-1541
Touch: 1 hour
Recoat: 2 hours
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity
TINTING: Will accept BOYSEN® Latex Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B-1466 Hansa Yellow and B-1407 Toluidine Red are for interior painting only.
THINNING SOLVENT: Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4-Liter can.
CLEAN-UP SOLVENT: Water
PACKAGING: 1-Liter, 4-Liters, and 16-Liters
APPLICATION: By brush or roller
|
|
SURFACE PREPARATION:
New Concrete
Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part Nation™ Masonry Neutralizer NS-10 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.
Drywall Substrates
Install and secure joints as per manufacturer’s recommendations.
Repainting
Scrape off all loose, scaling, flaking, and peeling paint as necessary. Make sure the surface is clean, dry, and good weather persists prior to painting.
For repainting concrete with a chalky surface, use BOYSEN® Chalk Blocker B-7304 as surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.
PAINTING SCHEDULE:
1st coat: Nation™ Dreamcoat™ Latex Paint White N-1540
Putty: BOYSEN® Masonry Putty B-7311
2nd & 3rd coat: Nation™ Dreamcoat™ Latex Paint White N-1540 or Nation™ Dreamcoat™ Gloss Latex White N-1541
|
