|
DESCRIPTION: Hudson® Timbercoat is a low-odor, single component waterborne non-yellowing urethane coating ideal for finishes on wood and parquet floors. It combines outstanding flexibility, good abrasion resistance, and an elegant appearance. It is formulated to resist common household detergents and chemicals.
PRINCIPAL USES: It is ideal for wooden floor parquets for residences and offices. It is formulated for interior and exterior wood works such as furniture, fixtures, cabinets, doors, and panels.
SERVICE CONDITIONS:
• Do not use Hudson® Timbercoat over alkyd-based wood fillers & wood stains.
• Tannin naturally appears in some wood species. Finished results may vary depending on wood species.
FINISH: Gloss, Semi-Gloss, and Matte
DRY TIME:
Recoat: 1 -2 hours
Full Cure: 7 days
THEORETICAL COVERAGE PER 3.5-Liters: 35 - 45 sq. m.
*Depending on surface texture and porosity
TINTING: Do not tint.
CLEAN-UP SOLVENT: Water
PACKAGING: 3.5-Liters
APPLICATION: By brush or spray
|
|
DESCRIPTION: Hudson® Timbercoat is a low-odor, single component waterborne non-yellowing urethane coating ideal for finishes on wood and parquet floors. It combines outstanding flexibility, good abrasion resistance, and an elegant appearance. It is formulated to resist common household detergents and chemicals.
PRINCIPAL USES: It is ideal for wooden floor parquets for residences and offices. It is formulated for interior and exterior wood works such as furniture, fixtures, cabinets, doors, and panels.
SERVICE CONDITIONS:
• Do not use Hudson® Timbercoat over alkyd-based wood fillers & wood stains.
• Tannin naturally appears in some wood species. Finished results may vary depending on wood species.
FINISH: Gloss, Semi-Gloss, and Matte
DRY TIME:
Recoat: 1 -2 hours
Full Cure: 7 days
THEORETICAL COVERAGE PER 3.5-Liters: 35 - 45 sq. m.
*Depending on surface texture and porosity
TINTING: Do not tint.
CLEAN-UP SOLVENT: Water
PACKAGING: 3.5-Liters
APPLICATION: By brush or spray
|
|
SURFACE PREPARATION:
Properly prepare surface to be treated by using 80-100 grit sandpaper. For final sanding, use a 400 grit sand paper. Thoroughly clean surfaces manually or by using a vacuum cleaner and then wipe with a dry cloth.
For repainting previously coated floors, make sure that the surface is free from wax or any kind of oily residues.
PAINTING SCHEDULE:
1. Thoroughly mix the product then apply the first coat. The first coat acts as a sealer.
2. Let it dry for an hour then lightly sand surface.
3. Apply another coat of Timbercoat.
4. Lightly sand after an hour.
5. Apply two or more coats of Timbercoat.
6. Full curing develops after 7 days.
|
