BOYSEN® Acrytex™ Clear Coat B-1700

BOYSEN® Acrytex™ Clear Coat B-1700

DESCRIPTION: BOYSEN® Acrytex™ Clear Coat is an acrylic solvent-based coating that has excellent adhesion, long-term durability, and easy clean-up characteristics.

PRINCIPAL USES: As a clear coat protection for bricks, natural stone, masonry and wooden surfaces

SERVICE CONDITIONS: Acrytex™ Clear Coat can only be applied onto bare substrates or surfaces painted with Acrytex™ products.

FINISH: Gloss

DRY TIME:
Touch: 30 minutes
Recoat: 2 hours

THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq. m.
*Depending on surface texture and porosity

TINTING: Not applicable

THINNING SOLVENT: 
BOYSEN® Acrytex™ Reducer B-1750
*If using brush or roller, use approximately 1-Liter of Acrytex™ Reducer B-1750 per 4-Liter of Acrytex™ paint.

CLEAN-UP SOLVENT: 
BOYSEN® Acrytex™ Reducer B-1750

PACKAGING: 4-Liters

APPLICATION: By brush, roller or spray

DESCRIPTION: BOYSEN® Acrytex™ Clear Coat is an acrylic solvent-based coating that has excellent adhesion, long-term durability, and easy clean-up characteristics.

PRINCIPAL USES: As a clear coat protection for bricks, natural stone, masonry and wooden surfaces

SERVICE CONDITIONS: Acrytex™ Clear Coat can only be applied onto bare substrates or surfaces painted with Acrytex™ products.

FINISH: Gloss

DRY TIME:
Touch: 30 minutes
Recoat: 2 hours

THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq. m.
*Depending on surface texture and porosity

TINTING: Not applicable

THINNING SOLVENT: 
BOYSEN® Acrytex™ Reducer B-1750
*If using brush or roller, use approximately 1-Liter of Acrytex™ Reducer B-1750 per 4-Liter of Acrytex™ paint.

CLEAN-UP SOLVENT: 
BOYSEN® Acrytex™ Reducer B-1750

PACKAGING: 4-Liters

APPLICATION: By brush, roller or spray

SURFACE PREPARATION:
New Concrete

Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar.

Wooden Surfaces
Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.


PAINTING SCHEDULE:
Apply 2 - 3 coats of BOYSEN® Acrytex™ Clear Coat B-1700 by spray or brush.