|
DESCRIPTION: BOYSEN® Semi-Gloss Enamel is an alkyd- type paint that provides substantial durability while still being a fast drying paint. It is formulated to give a tough and beautiful finish on wooden and metal surfaces. Its superior hiding properties, combined with a semi-gloss finish, makes it easier to clean and resistant to wear and abrasion.
PRINCIPAL USES: For interior and exterior wooden and metal surfaces.
FINISH: Semi-Gloss
DRY TIME:
Touch: 2 hours
Recoat: 8 hours
Full cure: 3 days
THEORETICAL COVERAGE PER 4-LITERS: 30 - 35 sq.m.
*Depending on surface texture and porosity
TINTING: Will accept BOYSEN® Oil Tinting Colors at a maximum level of 1⁄4 Liter per 4-Liter can. Take note that B-2319 Hansa Yellow and B-2315 Bulletin Red are for interior painting only.
THINNING SOLVENT: Thin with not more than 1-Liter of BOYSEN® Paint Thinner B-0340 per 4-Liter can of BOYSEN alkyd enamel products.
CLEAN-UP SOLVENT: BOYSEN® Paint Thinner B-0340
PACKAGING: 4-Liters and 16-Liters
APPLICATION: By brush or roller
AVAILABLE COLORS:
Whites may be tinted to pastel or light shades using BOYSEN Oil Tinting Colors.
|
|
DESCRIPTION: BOYSEN® Semi-Gloss Enamel is an alkyd- type paint that provides substantial durability while still being a fast drying paint. It is formulated to give a tough and beautiful finish on wooden and metal surfaces. Its superior hiding properties, combined with a semi-gloss finish, makes it easier to clean and resistant to wear and abrasion.
PRINCIPAL USES: For interior and exterior wooden and metal surfaces.
FINISH: Semi-Gloss
DRY TIME:
Touch: 2 hours
Recoat: 8 hours
Full cure: 3 days
THEORETICAL COVERAGE PER 4-LITERS: 30 - 35 sq.m.
*Depending on surface texture and porosity
TINTING: Will accept BOYSEN® Oil Tinting Colors at a maximum level of 1⁄4 Liter per 4-Liter can. Take note that B-2319 Hansa Yellow and B-2315 Bulletin Red are for interior painting only.
THINNING SOLVENT: Thin with not more than 1-Liter of BOYSEN® Paint Thinner B-0340 per 4-Liter can of BOYSEN alkyd enamel products.
CLEAN-UP SOLVENT: BOYSEN® Paint Thinner B-0340
PACKAGING: 4-Liters and 16-Liters
APPLICATION: By brush or roller
AVAILABLE COLORS:
Whites may be tinted to pastel or light shades using BOYSEN Oil Tinting Colors.
|
|
SURFACE PREPARATION:
Wooden Surfaces
Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.
For repainting, scrape off all loose, scaling, flaking, and peeling paint as necessary. Make sure the surface is clean, dry, and good weather persists prior to painting. Prime with BOYSEN® Flatwall Enamel B-800 before recoating.
Metal Surfaces
Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new galvanized surfaces, etch the surface by applying 10% BOYSEN® Metal Etching Solution B-71 (Dilute 1 part of B-71 to 9 parts water). Rinse with water and dry immediately.
Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.
For recoating pre-painted galvanized surfaces in good condition, sand lightly then wipe the surface with a clean rag before applying paint. Remove all loose paint film to sound surface. Spot prime bare substrate.
For corroded galvanized surfaces, remove rust by wire brushing and use BOYSEN® Metal Etching Solution B-71. Let it stay for 10-15 minutes. Be sure to remove all remaining residue. Immediately prime after drying.
PAINTING SCHEDULE:
Wooden Surfaces
1st coat: BOYSEN® Flatwall Enamel B-800
Putty: BOYSEN® Plasolux Glazing Putty B-311
2nd & 3rd coat: BOYSEN® Semi-Gloss Enamel
Metal Surfaces
1st coat: BOYSEN® Red Oxide Primer B-310 or BOYSEN® Rust-Off™ B-330
2nd & 3rd Coat: BOYSEN® Semi-Gloss Enamel
|
