BOYSEN®® Acqua Epoxy™ Acrylic Water-based Epoxy Paint

BOYSEN®® Acqua Epoxy™ is a two-component water-based acrylic epoxy paint that has superior solvent, chemical, and stain resistance. It is ideal for concrete floors and properly primed metal surfaces. It has the advantages of easier application and better weather resistance properties.

B‑2910 serves as a Curing Agent designed to be compounded with Acqua Epoxy.

Download Brochure

SURFACE PREPARATION

For pre-painted galvanized surfaces:

Sand lightly then wipe the surface with a clean rag before applying paint. Remove all loose paint film to sound surface. Spot prime bare substrate.

For corroded galvanized surfaces:

Remove rust by wire brushing and use BOYSEN®® Metal Etching Solution B‑71. Let it stay for 10-15 minutes before washing with water.

Be sure to remove all remaining residue and dry completely. Solvent wipe then prime immediately.

PAINTING SCHEDULE

Primer for bare substrate:
BOYSEN®® Epoxy Primer Red Oxide B‑2277 or BOYSEN®® Epoxy Primer Gray B‑2230

Topcoat (2-3 coats): BOYSEN®® Acqua Epoxy™

NOTES

Check paint compatibility of the existing paint film to the desired new paint.

Use only BOYSEN®® Epoxy Reducer B‑55 as thinning solvent for primer. BOYSEN®® Acqua Epoxy™ can be used as supplied.

Immediately apply primer after surface preparation to avoid occurrence of flash rusting.

Application of topcoat should be done within 7 days after priming to ensure good intercoat adhesion, otherwise re-application of primer is needed.

Topcoat will reach full hardness after 7 days of drying.

Colors

B‑2900

White

B‑2930

Gray

B‑2940

Access Blue

B‑2950

Chrome Green

B‑2965

Traffic Yellow

B‑2970

Safety Orange

B‑2976

Ceramic Red

B‑2990

Black

Available colors listed comes with B‑2910 Curing Agent for Acqua Epoxy.

* For technical reasons connected with color reproduction in print and paint manufacturing, these colors may not exactly match actual paint color.

Paintable Surface Area

SQM

Paint System	Product	Quantity
Topcoat	BOYSEN®® Acqua Epoxy™	10	L

* Quantity shown will only be an estimate

1 Gallon = 4 Liters

Want to try again with a different set of selections?

Start over with the button below

Start Over

For MSDS requests, please email technical@boysen.com.ph