BOYSEN®® Acrytex™ Clear Coat B‑1700
BOYSEN®® Acrytex™ Clear Coat is an acrylic solvent-based coating that has excellent adhesion, long-term durability, and easy clean-up characteristics.
Technical Data
Principal Uses
As a clear coat protection for bricks, natural stone, masonry and wooden surfaces
Vehicle Type
Thermoplastic Acrylic
Finish
Gloss
Dry Time
Touch: 30 minutes
Recoat: 2 hours
Recoat: 2 hours
*Measured at 25°C and 50% relative humidity
Density
(±0.05 kg/L)
0.92 kg/L
Theoretical Coverage
25-30 sq. m.
* per 4-Liters at 1.2-1.0 mils DFT
* per 4-Liters at 1.2-1.0 mils DFT
*Depending on surface texture and porosity
Tinting
Not applicable
Thinning
Solvent
BOYSEN®® Acrytex™ Reducer B‑1750
*If using brush or roller, use approximately 1-Liter of Acrytex Reducer B‑1750 per 4-Liter of Acrytex paint.
*If using brush or roller, use approximately 1-Liter of Acrytex Reducer B‑1750 per 4-Liter of Acrytex paint.
Clean-up
Solvent
BOYSEN®® Acrytex™ Reducer B‑1750
Packaging
4-Liters
Application
By brush, roller, or spray
SERVICE CONDITIONS
Acrytex Clear Coat can only be applied onto bare substrates or surfaces painted with Acrytex products.
SURFACE PREPARATION
New Concrete
Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar.
Wooden Surfaces
Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.
For MSDS requests, please email technical@boysen.com.ph