BOYSEN®® Acrytex™

BOYSEN®® Acrytex™ is an acrylic, solvent-based coating that forms a seamless, non-porous, watertight film that repels water and prevents seepage. It is noted for its excellent adhesion and long-term durability. It creates a very tight film, serving as a moisture sealant for concrete and a stain inhibitor for wood.

Download Brochure

SURFACE PREPARATION

Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN®® Paint and Varnish Remover B‑141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.

For repainting concrete with chalky old paint, use BOYSEN®® Chalk Blocker™ B‑7304 as surface conditioner.

In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.

Surface to be repainted should be clean and dry, free from oil, grease, dust and dirt, and all possible contaminants.

PAINTING SCHEDULE

Primer (for resulting bare concrete): BOYSEN®® Acrytex™ Primer B‑1705

Putty:
BOYSEN®® Acrytex™ Cast B‑1711

Texture:
BOYSEN®® Acrytex™ Cast B‑1711

Topcoat (2 coats): BOYSEN®® Acrytex™ Topcoat

NOTES

Any existing paint that is not BOYSEN®® Acrytex™ should be completely removed.

Spray BOYSEN®® Acrytex™ Cast B‑1711 evenly and consistently using a mortar gun to achieve the desired textured-finish.

For a flattened effect, press the applied texture using a plain wooden roller 10-15 minutes after spraying.

Dampen wooden roller with water to prevent the roller from sticking to the cast.

Colors

B‑1715

White

* For site-mixing pastel to medium hues, use only BOYSEN®® Acrytex™ Tinting Colors. For darker shades, you may request for factory-mixed colors by visiting accredited BOYSEN®® dealers near or within your area.

* For technical reasons connected with color reproduction in print and paint manufacturing, these colors may not exactly match actual paint color.

Paintable Surface Area

SQM

Paint System	Product	Quantity
Putty (Spot)	BOYSEN®® Acrytex™ Cast B‑1711	5	L
Texture	BOYSEN®® Acrytex™ Cast B‑1711	24	L
Topcoat	BOYSEN®® Acrytex™ Topcoat	16	L
Thinning Solvent for Putty and Texture	BOYSEN®® Acrytex™ Reducer B‑1750	4	L
Thinning Solvent for Topcoat	BOYSEN®® Acrytex™ Reducer B‑1750	4	L

* Quantity shown will only be an estimate

1 Gallon = 4 Liters

Want to try again with a different set of selections?

Start over with the button below

Start Over

For MSDS requests, please email technical@boysen.com.ph