BOYSEN®® Alkyd Reflectorized Traffic Paint
BOYSEN®® Alkyd Reflectorized Traffic Paint is an alkyd-type paint specially developed to resist the rigorous environment encountered on roads, pavements, and parking lots. It forms a durable film that offers good wear resistance and better reflective bead retention for safety markings.
Technical Data
Principal Uses
It is a reflectorized variant to the alkyd-based traffic paint for use on road markings and pavement linings.
Vehicle Type
Alkyd
Finish
Flat
Dry Time
Touch: 1 hour
Recoat: 4-6 hours
Recoat: 4-6 hours
*Measured at 25°C and 50% relative humidity
Density
(±0.05 kg/L)
1.35 kg/L
Theoretical Coverage
20-25 sq. m.
* per 4-Liters at 4.0-3.5 mils DFT
* per 4-Liters at 4.0-3.5 mils DFT
*Depending on surface texture and porosity
Tinting
Do not tint.
Thinning
Solvent
BOYSEN®® Paint Thinner B‑0340
Clean-up
Solvent
BOYSEN®® Paint Thinner B‑0340
Packaging
4-Liters
Application
By brush
SERVICE CONDITIONS
It is ideal only on areas in direct contact to wheel traffic; otherwise, the reflectorized effect will not manifest.
Mix the paint thoroughly to avoid settling of glass beads.
SURFACE PREPARATION
Concrete Surfaces
Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Remove oil and grease by using detergents or degreasers. Painting over a roughened concrete floor is recommended to improve adhesion of succeeding coats.
PAINTING SCHEDULE
1st coat:
BOYSEN®® Epoxy Primer White B‑2200 (diluted with 1:1 Epoxy Reducer B‑55)
BOYSEN®® Epoxy Primer White B‑2200 (diluted with 1:1 Epoxy Reducer B‑55)
2nd coat & 3rd coat:
BOYSEN®® Alkyd Reflectorized Traffic Paint (in any desired color)
BOYSEN®® Alkyd Reflectorized Traffic Paint (in any desired color)
Colors
B‑19-101
White
B‑19-161
Yellow
B‑19-191
Black
* For technical reasons connected with color reproduction in print and paint manufacturing, these colors may not exactly match actual paint color.
For MSDS requests, please email technical@boysen.com.ph