BOYSEN Automotive Lacquer B‑1300

BOYSEN®® Automotive Lacquer B‑1300

BOYSEN®® Automotive Lacquer is a nitrocellulose, solvent-based, high-gloss lacquer type paint that is easy to apply and dries rapidly to a durable, attractive finish.

Technical Data

Principal Uses

It is ideal for interior wooden surfaces such as doors, jambs, cabinets, and shelves and metal substrates.

Vehicle Type

Nitrocellulose

Finish

Gloss

Dry Time

Touch: 10 minutes
Recoat: 1 hour
*Measured at 25°C and 50% relative humidity

Density
(±0.05 kg/L)

1.10 kg/L

Theoretical Coverage

25-30 sq. m.
* per 4-Liters at 1.5-1.0 mils DFT
*Depending on surface texture and porosity

Tinting

Will accept BOYSEN®® Automotive Lacquer Tinting Colors at a maximum level of ¼ Liter per 4-Liter can. Darker shades should be factory-mixed.

Thinning
Solvent

BOYSEN®® Lacquer Thinner B‑50

Clean-up
Solvent

BOYSEN®® Lacquer Thinner B‑50

Packaging

1-Liter and 4-Liters

Application

By spray

SERVICE CONDITIONS

If necessary, add approximately 10% by volume of BOYSEN®® Lacquer Flo B‑1205 to the ready-to-use mixture.

SURFACE PREPARATION

Wooden Surfaces

Sand surface until wood is smooth to the touch. Hammer all nails deep enough to apply BOYSEN®® Lacquer Spot Putty B‑306. Dust off surfaces completely then wipe with a clean rag. If repainting, remove all paint by using manual or mechanical methods prior to the application of BOYSEN®® Automotive Lacquer.

Metal Surfaces

Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new galvanized surfaces, etch the surface by applying 10% BOYSEN®® Metal Etching Solution B‑71 (Dilute 1 part of B‑71 to 9 parts water). Rinse with water and dry immediately.
Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.
Treat rusted steel by sanding and wire brushing. Use BOYSEN®® Metal Etching Solution B‑71 on remaining rust. Let it stay for 10-15 minutes. Be sure to remove all remaining residue. Immediately prime after drying.

PAINTING SCHEDULE

Wooden Surfaces

1st coat:
BOYSEN®® Lacquer Primer Surfacer B‑305
Putty:
BOYSEN®® Lacquer Spot Putty B‑306
2nd coat:
BOYSEN®® Lacquer Primer Surfacer B‑305 on puttied areas
Final coat:
BOYSEN®® Automotive Lacquer B‑1300 in required number of coats

Metal Surfaces

1st coat:
BOYSEN®® Epoxy Primer
2nd & 3rd coat:
BOYSEN®® Automotive Lacquer B‑1300 in required number of coats
For MSDS requests, please email technical@boysen.com.ph