BOYSEN®® BUG OFF™ Anti-Insect Paint with Artilin

BOYSEN®® BUG OFF™ has inert microscopic crystals set in the paint layer that attack the nervous system of insects that get in contact with the painted surface.

Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN®® Masonry Neutralizer B‑44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.

Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting. Avoid using product on high friction areas.

Install and secure joints as per manufacturer's recommendations.

Scrape off all loose, scaling, flaking, and peeling paint manually or by using a paint and varnish remover, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.

For repainting concrete with chalky old paint, use BOYSEN®® Chalk Blocker™ B‑7304 as a surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.

For repainting other surfaces such as wood, follow the first step then apply the appropriate primer before recoating.