BOYSEN®® Clear Acrylic Emulsion B‑700
BOYSEN®® Clear Acrylic Emulsion is an acrylic type coating that acts as an intermediate layer against dampness on interior masonry.
Technical Data
Principal Uses
Improves the performance of latex paint applied on concrete in damp conditions. It may also be used as preparation for the installation of wallpapers.
Vehicle Type
Acrylic
VOC
(±2.0 g/L)
0.01 g/L
Dry Time
Touch: 30 minutes
Recoat: 2 hours
Recoat: 2 hours
*Measured at 25°C and 50% relative humidity
Density
(±0.05 kg/L)
1.05 kg/L
Theoretical Coverage
25-30 sq. m.
* per 4-Liters at 1.5-1.0 mils DFT
* per 4-Liters at 1.5-1.0 mils DFT
*Depending on surface texture and porosity
Tinting
Not applicable
Thinning
Solvent
Use as supplied.
Clean-up
Solvent
Water
Packaging
1-Liter and 4-Liters
Application
By brush, roller, or airless spray
SURFACE PREPARATION
Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN®® Masonry Neutralizer B‑44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.
PAINTING SCHEDULE
Primer:
BOYSEN®® Permacoat™ Flat Latex B‑701
BOYSEN®® Permacoat™ Flat Latex B‑701
2nd coat:
BOYSEN®® Clear Acrylic Emulsion B‑700
BOYSEN®® Clear Acrylic Emulsion B‑700
Topcoat:
BOYSEN®® Permacoat™ Latex (Flat, Semi-Gloss, Gloss)
BOYSEN®® Permacoat™ Latex (Flat, Semi-Gloss, Gloss)
For MSDS requests, please email technical@boysen.com.ph