Wood
Interior: Decorative
and Special Finishes
New
Interior: Decorative
and Special Finishes
New
BOYSEN®® DECORe™
Classic
Wood
Interior: Decorative
and Special Finishes
New
Interior: Decorative
and Special Finishes
New
BOYSEN®® DECORe™
Classic
BOYSEN®® DECORe™ Classic
BOYSEN®® DECORe™ Classic is a unique, water-based decorative paint system that can simulate the complex texture and distinctive finish of the European masters right in your home. Unlike traditional faux finishes, BOYSEN®® DECORe™ Classic does not need elaborate intermixing of colors, layering techniques or sophisticated equipment. Simple and effortless brushing is all that's required to achieve this very exquisite finish.
SURFACE PREPARATION
Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter.
Hammer all nails deep enough to apply putty.
Sand surface until wood is smooth to the touch.
Dust off surfaces completely then wipe with a clean rag.
PAINTING SCHEDULE
Prime bare wood with BOYSEN®® Flatwall Enamel B‑800.
Fully cover the entire surface using BOYSEN®® DECORe™ Undercoat B‑4605 by brush or roller. Let dry for 1 hour before applying the succeeding layer.
Mix BOYSEN®® DECORe™ Toner into BOYSEN®® DECORe™ Base B‑4610. A color can be applied in different tones by varying amount of toner used, either Full, One-half, One- Fourth, or any other proportion depending on desired shade. Stir until uniform consistency is achieved.
Using a BOYSEN®® DECORe™ brush, apply the prepared BOYSEN®® DECORe™ Base with Toner starting from top corner, working with short crisscrossing strokes. Brush through surface while the paint is still wet to achieve a more uniform pattern.
Wait for 8-10 minutes after applying BOYSEN®® DECORe™. Then, lightly comb the surface using the plastic scraper with long crisscrossing strokes, the scraper inclined and close to the surface.
Fully cover the entire surface using BOYSEN®® DECORe™ Undercoat B‑4605 by brush or roller. Let dry for 1 hour before applying the succeeding layer.
Mix BOYSEN®® DECORe™ Toner into BOYSEN®® DECORe™ Base B‑4610. A color can be applied in different tones by varying amount of toner used, either Full, One-half, One- Fourth, or any other proportion depending on desired shade. Stir until uniform consistency is achieved.
Using a BOYSEN®® DECORe™ brush, apply the prepared BOYSEN®® DECORe™ Base with Toner starting from top corner, working with short crisscrossing strokes. Brush through surface while the paint is still wet to achieve a more uniform pattern.
Wait for 8-10 minutes after applying BOYSEN®® DECORe™. Then, lightly comb the surface using the plastic scraper with long crisscrossing strokes, the scraper inclined and close to the surface.
NOTES
Do not thin mixture with water or any solvent.
Designs can only be achieved using BOYSEN®® DECORe™ Undercoat.
Only use the provided BOYSEN®® DECORe™ Brush and Scraper. The desired finish may not be achieved if a different material is used.
Colors
B‑4730
Light Gray
1 Toner
1/2 Toner
1/4 Toner
B‑4741
Aqua Blue
1 Toner
1/2 Toner
1/4 Toner
B‑4742
Light Blue
1 Toner
1/2 Toner
1/4 Toner
B‑4743
Deep Blue
1 Toner
1/2 Toner
1/4 Toner
B‑4750
Dark Green
1 Toner
1/2 Toner
1/4 Toner
B‑4762
Medium Yellow
1 Toner
1/2 Toner
1/4 Toner
B‑4763
Bright Yellow
1 Toner
1/2 Toner
1/4 Toner
B‑4771
Soft Red
1 Toner
1/2 Toner
1/4 Toner
B‑4772
Brick Red
1 Toner
1/2 Toner
1/4 Toner
B‑4780
Brown
1 Toner
1/2 Toner
1/4 Toner
* For technical reasons connected with color reproduction in print and paint manufacturing, these colors may not exactly match actual paint color.
SQM
| Paint System | Product | Quantity | |
| Primer | BOYSEN®® Flatwall Enamel B‑800 | 5 | L |
| Putty (Full) | BOYSEN®® Plasolux Glazing Putty B‑311 | 12 | L |
| Undercoat | BOYSEN®® DECORe™ Classic Undercoat B‑4605 | 10 | L |
| Basecoat | BOYSEN®® DECORe™ Classic Base B‑4610 | 5 | L |
| Thinning Solvent for Primer | BOYSEN®® Paint Thinner B‑0340 | 2 | L |
| Thinning Solvent for Putty | BOYSEN®® Paint Thinner B‑0340 | 2 | L |
| Toner (Full-Tone) | BOYSEN®® DECORe™ Classic Toner | 240 | mL |
For MSDS requests, please email technical@boysen.com.ph