BOYSEN®® DECORe™ Sandino™

BOYSEN®® DECORe™ Sandino™ is a unique, water-based, semi-transparent decorative paint system that exudes the richness of sand with lustrous accents of gold or silver.
There's no need for elaborate intermixing of colors, complicated layering techniques, or sophisticated equipment. Effortless brushing is all that's needed to achieve this very exquisite finish.
BOYSEN®® DECORe™ Sandino™ is available in Sandino™ Gold B‑4960.
Download Brochure

Technical Data

Principal Uses

Ideal for interior concrete walls, wood, and drywalls that are painted with a flat topcoat.

Vehicle Type

Acrylic

Finish

Textured with Luster

VOC
(±2.0 g/L)

<50 g/L

Dry Time

Touch: 2 hours
*Measured at 25°C and 50% relative humidity

Theoretical Coverage

6-7 sq. m.
*Consumption may vary according to the effect achieved.
* per 1-Liter at DFT
*Depending on surface texture and porosity

Thinning
Solvent

Use as supplied. Do not thin.

Clean-up
Solvent

Water

Packaging

1-Liter

Application

By DECORe™ brush

Density

1.05 kg/L

SURFACE PREPARATION

New Concrete

Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN®® Masonry Neutralizer B‑44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.

Wooden Surfaces

Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.

Drywall Substrates

Install and secure joints as per manufacturer's recommendations.

Repainting

Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN®® Paint and Varnish Remover B‑141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.
For repainting concrete, use BOYSEN®® Chalk Blocker™ B‑7304 as surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before washing off residue. Let dry.
For repainting other surfaces such as wood, follow the first step then apply the appropriate primer before recoating.

SERVICE CONDITIONS

DECORe™ Sandino™ should only be applied as a decorative finish on surfaces that are properly painted with a flat topcoat.
For best results, the color of the flat topcoat should complement the effect of Sandino™ Gold.

PAINTING SCHEDULE

Primer

Concrete- BOYSEN®® Permacoat™ Flat Latex B‑701

Wood- BOYSEN®® Flatwall Enamel B‑800

Putty

Concrete- BOYSEN®® Masonry Putty B‑7311

Wood- BOYSEN®® Plasolux Glazing Putty B‑311

Colored Basecoat

Concrete- 2 coats of BOYSEN®® Permacoat™ Flat

Wood- 2 coats of BOYSEN®® Flatwall Enamel

Decorative Topcoat

Using a DECORe™ brush, apply Sandino™ in light, crisscrossing strokes, spreading it as evenly as possible.

Avoid lap marks by applying the product in sections. Leave a small gap in between the sections then just spot apply Sandino™ on the gaps right after to even it out.

Colors

B‑4960
Gold (Over BOYSEN®® Permacoat™ Flat Latex)
Over B‑701 White
Over B‑791 Black
* For technical reasons connected with color reproduction in print and paint manufacturing, these colors may not exactly match actual paint color.
For MSDS requests, please email technical@boysen.com.ph