BOYSEN Elasti-kote Premium Elastomeric Wall Covering

BOYSEN®® Elasti-kote™ Premium Elastomeric Wall Covering

BOYSEN®® Elasti-kote™ is a 100% acrylic water-based elastomeric wall paint that is especially formulated to bridge micro/hairline cracks and crevices. It provides good waterproofing and protection especially for high-rise buildings. As a well-formulated acrylic elastomeric paint, it is also UV resistant and has excellent weatherability.
It has superior crack bridging ability due to its excellent elongation and tensile strength. It is also able to cover hairline cracks and crevices and prevent the emergence of unsightly efflorescence.
Download Brochure

Technical Data

Principal Uses

It is ideal for exterior concrete surfaces.

Vehicle Type

Acrylic

Finish

Sealer B‑5800
Matte
Basecoat B‑5805
Matte
Topcoat B‑5815
Semi-Gloss
Putty B‑5811
N/A

VOC
(±2.0 g/L)

Sealer B‑5800
22.5 g/L
Basecoat B‑5805
17.2 g/L
Topcoat B‑5815
14.0 g/L
Putty B‑5811
2.8 g/L

Dry Time

Sealer B‑5800
Touch: 30 minutes
Recoat: 2 hours
Basecoat B‑5805
Touch: 30 minutes
Recoat: 4 hours
Topcoat B‑5815
Touch: 1 hour
Recoat: 2 hours
Putty B‑5811
Touch: 30 minutes
Recoat: 2 hours
*Measured at 25°C and 50% relative humidity

Density
(±0.05 kg/L)

Sealer B‑5800
1.03 kg/L
Basecoat B‑5805
1.36 kg/L
Topcoat B‑5815
1.21 kg/L
Putty B‑5811
1.42 kg/L

Theoretical Coverage

Sealer B‑5800
25-30 sq. m.
* per 4-Liters at DFT
Basecoat B‑5805
With mesh: 18-22 sq. m.
W/out mesh: 25-30 sq. m.
* per 4-Liters at DFT
Topcoat B‑5815
With mesh: 18-22 sq. m.
W/out mesh: 25-30 sq. m.
* per 4-Liters at DFT
Putty B‑5811
25-30 sq. m.
* per 4-Liters at DFT
*Depending on surface texture and porosity

Tinting

Sealer B‑5800
N/A
Basecoat B‑5805
All colors should be factory-mixed
Topcoat B‑5815
All colors should be factory-mixed
Putty B‑5811
N/A

Thinning
Solvent

Use as supplied. Do not thin.

Clean-up
Solvent

Water

Packaging

4-Liters and 16-Liters

Application

Sealer B‑5800
By brush, roller, or airless spray
Basecoat B‑5805
By brush, roller, or airless spray
Topcoat B‑5815
By brush, roller, or airless spray
Putty B‑5811
By putty knife

Dry Film Thickness

Sealer B‑5800
0.8-0.6 mils
Basecoat B‑5805
5.5-4.5 mils
Topcoat B‑5815
1.7-1.4 mils
Putty B‑5811
N/A

SERVICE CONDITIONS

Preferably applied by a BOYSEN®® accredited painting contractor

SURFACE PREPARATION

New Concrete

Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN®® Masonry Neutralizer B‑44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.

Repainting

For repainting concrete with chalky old paint, use BOYSEN®® Chalk Blocker™ B‑7304 as surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before washing off residue. Let dry.

PAINTING SCHEDULE

OPTION 1 (PLAIN FINISH)
1st coat:
BOYSEN®® Elasti-kote™ Sealer B‑5800
2nd coat:
BOYSEN®® Elasti-kote™ Basecoat B‑5805
Spot putty:
BOYSEN®® Elasti-kote™ Putty B‑5811 (if needed)
3rd coat:
BOYSEN®® Elasti-kote™ Basecoat B‑5805 (for puttied areas)
4th & 5th coat:
BOYSEN®® Elasti-kote™ Topcoat B‑5815



OPTION 2 (WITH FIBERMESH REINFORCING MEMBRANE)
1st coat:
BOYSEN®® Elasti-kote™ Sealer B‑5800
Spot putty:
Elasti-kote Putty B‑5811 (if needed)
2nd coat:
BOYSEN®® Elasti-kote™ Basecoat B‑5805
Reinforcing Membrane:
Fibermesh Matting
3rd coat:
BOYSEN®® Elasti-kote™ Basecoat B‑5805
4th & 5th coat:
BOYSEN®® Elasti-kote™ Topcoat B‑5815
For MSDS requests, please email technical@boysen.com.ph