Concrete
Exterior:
Plain Finish
Repaint
Exterior:
Plain Finish
Repaint
BOYSEN®® Elasti-kote™ Premium
Elastomeric Wall Covering
Concrete
Exterior:
Plain Finish
Repaint
Exterior:
Plain Finish
Repaint
BOYSEN®® Elasti-kote™ Premium
Elastomeric Wall Covering
BOYSEN®® Elasti-kote™ Premium Elastomeric Wall Covering
BOYSEN®® Elasti-kote™ is a 100% acrylic water-based elastomeric wall paint that is especially formulated to bridge micro/hairline cracks and crevices. It provides good waterproofing and protection especially for high-rise buildings. As a well-formulated acrylic elastomeric paint, it is also UV resistant and has excellent weatherability.
It has superior crack bridging ability due to its excellent elongation and tensile strength. It is also able to cover hairline cracks and crevices and prevent the emergence of unsightly efflorescence.
SURFACE PREPARATION
Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN®® Paint and Varnish Remover B‑141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.
For repainting concrete with chalky old paint, use BOYSEN®® Chalk Blocker™ B‑7304 as surface conditioner.
In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.
Surface to be repainted should be clean and dry, free from oil, grease, dust and dirt, and all possible contaminants.
PAINTING SCHEDULE
Option 1:
Without Fibermesh Reinforcing Membrane
1st coat (for resulting bare substrate): BOYSEN®® Elasti-kote™ Sealer B‑5800
Without Fibermesh Reinforcing Membrane
1st coat (for resulting bare substrate): BOYSEN®® Elasti-kote™ Sealer B‑5800
2nd coat:
BOYSEN®® Elasti-kote™ Basecoat B‑5805
BOYSEN®® Elasti-kote™ Basecoat B‑5805
Spot Putty:
BOYSEN®® Elasti-kote™ Putty B‑5811 (if needed)
BOYSEN®® Elasti-kote™ Putty B‑5811 (if needed)
3rd coat:
BOYSEN®® Elasti-kote™ Basecoat B‑5805 (for puttied areas)
BOYSEN®® Elasti-kote™ Basecoat B‑5805 (for puttied areas)
4th & 5th coat:
BOYSEN®® Elasti-kote™ Topcoat B‑5815
BOYSEN®® Elasti-kote™ Topcoat B‑5815
Option 2:
With Fibermesh Reinforcing Membrane
1st coat (for resulting bare substrate): BOYSEN®® Elasti-kote™ Sealer B‑5800
With Fibermesh Reinforcing Membrane
1st coat (for resulting bare substrate): BOYSEN®® Elasti-kote™ Sealer B‑5800
2nd coat:
BOYSEN®® Elasti-kote™ Basecoat B‑5805
BOYSEN®® Elasti-kote™ Basecoat B‑5805
Reinforcing Membrane:
Fibermesh Matting (1.2mm x 60g/sqm x 1m x 100m)
Fibermesh Matting (1.2mm x 60g/sqm x 1m x 100m)
3rd coat:
BOYSEN®® Elasti-kote™ Basecoat B‑5805
BOYSEN®® Elasti-kote™ Basecoat B‑5805
4th & 5th coat:
BOYSEN®® Elasti-kote™ Topcoat B‑5815
BOYSEN®® Elasti-kote™ Topcoat B‑5815
SERVICE CONDITIONS
Preferably applied by a BOYSEN®® accredited painting contractor.
Tinting is not recommended. All colors should be factory-mixed.
Colors
B‑5815
White
* For factory-mixed colors, please visit accredited BOYSEN®® dealers near or within your area.
* For technical reasons connected with color reproduction in print and paint manufacturing, these colors may not exactly match actual paint color.
SQM
w/o Fiber Mesh
w/ Fiber Mesh
Paint System | Product | Quantity | |
Putty (Spot) | BOYSEN®® Elasti‑kote™ Putty B‑5811 | 5 | L |
Basecoat | BOYSEN®® Elasti‑kote™ Basecoat B‑5805 | 5 | L |
Topcoat | BOYSEN®® Elasti‑kote™ Topcoat B‑5815 | 10 | L |
For MSDS requests, please email technical@boysen.com.ph