BOYSEN®® Epoxy Enamel

BOYSEN®® Epoxy Enamel is a high quality, two-component, epoxy-polyamide system that has excellent chemical resistance.

B‑2101 and B‑2103 serve as Curing Agents designed to be compounded with Epoxy Enamel White and Epoxy Enamel Colored, respectively.

SURFACE PREPARATION

Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter.

For new galvanized surfaces:

Etch the surface by applying 10% BOYSEN®® Metal Etching Solution B‑71 (Dilute 1 part of B‑71 to 9 parts water). Rinse with water and dry immediately.

Note: Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched. However, formation of rust or corrosion should be treated prior to painting.

PAINTING SCHEDULE

Primer:
BOYSEN®® Epoxy Primer Red Oxide B‑2277 or BOYSEN®® Epoxy Primer Gray B‑2230

Topcoat (2-3 coats): BOYSEN®® Epoxy Enamel

NOTES

Use only BOYSEN®® Epoxy Reducer B‑55 as thinning solvent.

Immediately apply primer after surface preparation to avoid occurrence of flash rusting.

Application of topcoat should be done within 7 days after priming to ensure good intercoat adhesion, otherwise re-application of primer is needed.

Topcoat will reach full hardness after 7 days of drying.

Colors

B‑2100

White

B‑2130

Silver Gray

B‑2132

Gray

B‑2140

Royal Blue

B‑2151

Dark Green

B‑2171

International Red

B‑2190

Black

* For technical reasons connected with color reproduction in print and paint manufacturing, these colors may not exactly match actual paint color.

Paintable Surface Area

SQM

Paint System	Product	Quantity
Primer	BOYSEN®® Epoxy Primer White B‑2200	6	L
Topcoat	BOYSEN®® Epoxy Enamel	10	L
Thinning Solvent for Primer and Topcoat	BOYSEN®® Epoxy Reducer B‑55	4	L

* Quantity shown will only be an estimate

1 Gallon = 4 Liters

Want to try again with a different set of selections?

Start over with the button below

Start Over

For MSDS requests, please email technical@boysen.com.ph