BOYSEN®® Gloss Lacquer Enamel White B‑1200

Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.

Wipe with a rag soaked in paint thinner to remove grease, oil, wax, and other foreign matter. For new galvanized surfaces, etch the surface by applying 10% BOYSEN®® Metal Etching Solution B‑71 (Dilute 1 part of B‑71 to 9 parts water). Rinse with water and dry immediately.

Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.

Treat rusted steel by sanding and wire brushing. Use BOYSEN®® Metal Etching Solution B‑71 on remaining rust. Let it stay for 10-15 minutes. Be sure to remove all remaining residue. Immediately prime after drying.

Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN®® Paint and Varnish Remover B‑141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.

For repainting other surfaces such as wood, apply the appropriate primer before recoating.