BOYSEN®® Lacquer Spot Putty B‑306

BOYSEN®® Lacquer Spot Putty B‑306 is a high quality, nitrocellulose-based, lacquer type putty for wood. It is specially formulated for easy application and sanding.

Technical Data

Principal Uses

It is ideal for interior wooden surfaces.

Vehicle Type

Nitrocellulose

Dry Time

Touch: 5-10 minutes
Recoat: 1 hour

*Measured at 25°C and 50% relative humidity

Density
(±0.05 kg/L)

1.36 kg/L

Theoretical Coverage

10-12 sq. m. for full putty
25 sq. m. for spot putty
* per 4-Liters

*Depending on surface texture and porosity

Thinning
Solvent

BOYSEN®® Lacquer Thinner B‑50

Clean-up
Solvent

BOYSEN®® Lacquer Thinner B‑50

Packaging

1-Liter and 4-Liters

Application

Putty knife

SURFACE PREPARATION

Wooden Surfaces

Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.

Repainting

Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN®® Paint and Varnish Remover B‑141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.

For repainting other surfaces such as wood, apply the appropriate primer before recoating.

PAINTING SCHEDULE

New Wooden Surfaces

1st coat:
BOYSEN®® Lacquer Primer Surfacer B‑305

2nd coat:
BOYSEN®® Lacquer Spot Putty B‑306

3rd coat:
BOYSEN®® Lacquer Primer Surfacer B‑305

Final coat:
BOYSEN®® Automotive Lacquer B‑1300 (in required coats) or BOYSEN®® Gloss Lacquer Enamel B‑1200

For MSDS requests, please email technical@boysen.com.ph