BOYSEN®® Matte Shield™ B‑4600 Clear Matte Coating
BOYSEN®® Matte Shield™ is an acrylic, water-based clear matte coating ideally used as a topcoat over any paint finish that needs protection from common household stains. It is particularly useful in maintaining the clean and elegant look of specialty decorative finishes like DECORe™ Classic. This low-odor formulation is designed to provide excellent abrasion resistance ideal for protecting painted surfaces indoors.
Technical Data
Principal Uses
Designed as a protective clear matte topcoat for interior paints including BOYSEN®® DECORe™ Classic.
Vehicle Type
Acrylic
Finish
Matte
VOC
(±2.0 g/L)
5.29 g/L
Dry Time
Touch: 1 hour
Recoat: 2 hours
Recoat: 2 hours
*Measured at 25°C and 50% relative humidity
Density
(±0.05 kg/L)
1.04 kg/L
Theoretical Coverage
30-35 sq. m.
* per 4-Liters at 1.7-1.4 mils DFT
* per 4-Liters at 1.7-1.4 mils DFT
*Depending on surface texture and porosity
Tinting
Not applicable
Thinning
Solvent
Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4-Liter can.
Clean-up
Solvent
Water
Packaging
4-Liters
Application
By brush, roller, or airless spray
SERVICE CONDITIONS
Wipe off stains using a soft cloth, mild soap and water while applying moderate pressure. Do not use abrasive cleansers as these may damage paint film.
PAINTING SCHEDULE
(After application of the BOYSEN®® DECORe™ Classic paint system or other latex paint systems)
Apply at least 2 coats of BOYSEN®® Matte Shield™ B‑4600. Resulting finish completely cures after 7 days reaching full stain resistance.
Apply at least 2 coats of BOYSEN®® Matte Shield™ B‑4600. Resulting finish completely cures after 7 days reaching full stain resistance.
For MSDS requests, please email technical@boysen.com.ph