BOYSEN Permatex B‑3101 Textured Water-based Paint

BOYSEN®® Permatex™ B‑3101 Textured Water-based Paint

BOYSEN®® Permatex™ is a water-based, full-bodied paint that dries to a fine, rubbery coating that does not become brittle over time. It creates a beautiful textured finish on interior walls and ceilings that brings elegance to your home's interior. It adheres easily on wood, concrete, or fiberboard surfaces. It is also able to conceal hairline cracks and minor surface imperfections.

Technical Data

Principal Uses

It is ideal for interior surfaces like concrete, drywall, and properly primed wood. Avoid using product on high friction areas.

Vehicle Type

Acrylic

Finish

Textured

VOC
(±2.0 g/L)

2.5 g/L

Dry Time

Touch: 2 hours
Recoat: 8-12 hours
*Measured at 25°C and 50% relative humidity

Density
(±0.05 kg/L)

1.22 kg/L

Theoretical Coverage

5-6 sq. m.
* per 4-Liters at 36.2-13.6 mils DFT
*Depending on surface texture and porosity

Tinting

Do not tint. If a colored finish is desired, top coat with BOYSEN®® Permacoat™ or Healthy Home.

Thinning
Solvent

Do not thin. Use as supplied.

Clean-up
Solvent

Water

Packaging

4-Liters

Application

By textured roller

SERVICE CONDITIONS

Different textured effects may be achieved by using a variety of design rollers.

MATERIAL PREPARATION

For a regular texture pattern, apply BOYSEN®® Permatex™ straight from the can using a textured roller. If a different design pattern is desired, first apply BOYSEN®® Permatex™ using a textured roller. While paint is still wet and workable, press desired design pattern roller over wet paint and roll in one direction to impress the design onto the surface.

SURFACE PREPARATION

New Concrete

Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN®® Masonry Neutralizer B‑44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.

Wooden Surfaces

Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting. Avoid using product on high friction areas.

Drywall Substrates

Install and secure joints as per manufacturer's recommendations.

Repainting

Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN®® Paint and Varnish Remover B‑141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.
For repainting concrete with chalky old paint, use BOYSEN®® Chalk Blocker™ B‑7304 as surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.
For repainting other surfaces such as wood, apply the appropriate primer before recoating.

PAINTING SCHEDULE

Concrete Surfaces

Primer:
BOYSEN®® Permacoat™ Flat Latex B‑701
Putty:
BOYSEN®® Masonry Putty B‑7311
Texture:
BOYSEN®® Permatex™ B‑3101
2nd & 3rd coat:
BOYSEN®® Permacoat™ Latex (any desired color) (optional)

Wooden Surfaces

Primer:
BOYSEN®® Flatwall Enamel B‑800
Putty:
BOYSEN®® Plasolux Glazing Putty B‑311
Texture:
BOYSEN®® Permatex™ B‑3101
2nd & 3rd coat:
BOYSEN®® Permacoat™ Latex (any desired color) (optional)
For MSDS requests, please email technical@boysen.com.ph