BOYSEN Plasolux Primer Surfacer B‑307

BOYSEN®® Plasolux Primer Surfacer B‑307

BOYSEN®® Plasolux Primer Surfacer is an alkyd-type paint formulated to provide depth build for the final coats of BOYSEN®® Quick Drying Enamel.

Technical Data

Principal Uses

Ideally used as primer surfacer for interior and exterior wooden surfaces.

Vehicle Type

Alkyd

Dry Time

Touch: 1 hour
Recoat: 5 hours
*Measured at 25°C and 50% relative humidity

Density
(±0.05 kg/L)

1.41 kg/L

Theoretical Coverage

25-30 sq. m.
* per 4-Liters at 2.5-2.0 mils DFT
*Depending on surface texture and porosity

Tinting

Not applicable

Thinning
Solvent

Thin with not more than 1-Liter of BOYSEN®® Paint Thinner B‑0340 per 4-Liter can of BOYSEN®® alkyd enamel products.

Clean-up
Solvent

BOYSEN®® Paint Thinner B‑0340

Packaging

1-Liter and 4-Liters

Application

By brush or roller

SURFACE PREPARATION

Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.
For repainting, scrape off all loose, scaling, flaking, and peeling paint as necessary. Make sure that the surface is clean, dry, and good weather persists prior to painting.

PAINTING SCHEDULE

Wooden Surfaces

Primer:
BOYSEN®® Plasolux Primer Surfacer B‑307
Putty:
BOYSEN®® Plasolux Glazing Putty B‑311
Topcoat:
BOYSEN®® Quick Drying Enamel (any desired color)
For MSDS requests, please email technical@boysen.com.ph