BOYSEN®® Spar Varnish B‑58
BOYSEN®® Spar Varnish B‑58 is a clear, alkyd-type glossy varnish that dries to a hard, durable film that does not obscure the natural appearance of wood.
Technical Data
Principal Uses
It is ideal for interior sealed wood such as furniture, store fixtures, cabinets, doors, and panels.
Vehicle Type
Alkyd
Finish
Gloss
Dry Time
Touch: 4-6 hours
Recoat: 12 hours
Recoat: 12 hours
*Measured at 25°C and 50% relative humidity
Density
(±0.05 kg/L)
0.91 kg/L
Theoretical Coverage
25-30 sq. m.
* per 4-Liters at 1.5-1.0 mils DFT
* per 4-Liters at 1.5-1.0 mils DFT
*Depending on surface texture and porosity
Tinting
Do not tint.
Thinning
Solvent
BOYSEN®® Paint Thinner B‑0340
Clean-up
Solvent
BOYSEN®® Paint Thinner B‑0340
Packaging
1-Liter and 4-Liters
Application
By brush or spray
SURFACE PREPARATION
Sand surface until wood is smooth to the touch. Hammer all nails deep enough to apply wood filler. Dust off surfaces completely then wipe with a clean rag. If repainting, remove all paint by using manual or mechanical methods. If old lacquer finish is in good condition, sand surface until smooth. Make sure to clean and dry surface before coating with BOYSEN®® Spar Varnish.
PAINTING SCHEDULE
Stain:
BOYSEN®® Oil Wood Stain (optional)
BOYSEN®® Oil Wood Stain (optional)
Final coat:
BOYSEN®® Spar Varnish B‑58.
Recoat again for a clear gloss finish.
BOYSEN®® Spar Varnish B‑58.
Recoat again for a clear gloss finish.
For MSDS requests, please email technical@boysen.com.ph