BOYSEN®® WoodPrime™ B‑180 Water-based Wood Primer
BOYSEN®® WoodPrime™ is an acrylic water-based primer designed for application onto interior wooden substrates. It is low in odor and is formulated to have better tannin resistance.
Technical Data
Vehicle Type
Acrylic
VOC
(±2.0 g/L)
15.94 g/L
Dry Time
Touch: 30 minutes
Recoat: 24 hours
Recoat: 24 hours
*Measured at 25°C and 50% relative humidity
Density
(±0.05 kg/L)
1.20 kg/L
Theoretical Coverage
20 to 25 sq. m.
*per 4-Liters at 0.8 mils DFT
*per 4-Liters at 0.8 mils DFT
*Depending on surface texture and porosity
Tinting
Not applicable
Thinning
Solvent
Use as supplied.
Clean-up
Solvent
Water
Packaging
4-Liters
Application
By brush, roller, or airless spray
SERVICE CONDITIONS
Tannin may still appear after one coat of BOYSEN®® Wood Prime B‑180. However, it will not migrate to the top coat.
It is best to refrain the use of the product on high-friction areas such as fixtures and furniture.
Stir well before using. Close container and wash painting tools in soapy water immediately after use.
SURFACE PREPARATION
Wooden Surfaces
Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.
For repainting, scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN®® Paint and Varnish Remover B‑141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.
PAINTING SCHEDULE
Wooden Surfaces
Primer:
BOYSEN®® WoodPrime™ B‑180
BOYSEN®® WoodPrime™ B‑180
Putty:
BOYSEN®® Masonry Putty B‑7311
BOYSEN®® Masonry Putty B‑7311
2nd & 3rd coat:
Any water-based BOYSEN®® topcoat
Any water-based BOYSEN®® topcoat
For MSDS requests, please email technical@boysen.com.ph