Floor
Interior:
Wood Varnish
Repaint

Hudson®® Polyurethane Floor
Varnish Topcoat and Sealer

Floor
Interior:
Wood Varnish
Repaint

Hudson®® Polyurethane Floor
Varnish Topcoat and Sealer

Hudson®® Polyurethane Floor Varnish Topcoat and Sealer

Hudson®® Polyurethane Floor Varnish Sealer is an aromatic, two-component urethane sealer that provides for the good adhesion of Hudson®® Polyurethane Floor Varnish Topcoat.

Hudson®® Polyurethane Floor Varnish Topcoat is an aromatic, two-component urethane topcoat that provides wooden surfaces a tough, non-slip, mar-resistant film upon curing.

SURFACE PREPARATION

Remove all paint by manual, chemical or mechanical methods.

Sand surface until wood is smooth to the touch.

Hammer all nails deep enough to apply wood filler.

Dust off surfaces completely then wipe with a clean rag.

MATERIAL PREPARATION

Sealer: 3.5-Liters of Hudson®® Polyurethane Floor Varnish Sealer should be thoroughly mixed with ½ Liter of its catalyst. The product workability is only for 4 hours, maximum. Any unused material will gel.

Topcoat: Hudson®® Polyurethane Floor Varnish Topcoat is mixed with its catalyst on a 3:1 ratio by volume, respectively. Maximum workability of mixture is 4 hours. Any unused material will gel.

APPLICATION SCHEDULE

Sealer (1st and 2nd coats): Hudson®® Polyurethane Floor Varnish Sealer

Topcoat (3rd to 5th coats): Hudson®® Polyurethane Floor Varnish Topcoat

NOTES

Allow the product to cure for 3 days for foot traffic abrasion and 7 days for heavy-duty use.

Paintable Surface Area

SQM

Paint System	Product	Quantity
Sealer	Hudson®® Polyurethane Floor Varnish Sealer	12	L
Topcoat	Hudson®® Polyurethane Floor Varnish Topcoat	18	L
Thinning Solvent for Sealer and Topcoat	Hudson®® Polyurethane Floor Varnish Reducer	8	L
Complete removal to bare substrate is recommended prior to repainting.		1

Application using brush. For spray-applied, thin not more than 1:1 mixing ratio of Hudson®® Polyurethane Reducer.

* Quantity shown will only be an estimate

1 Gallon = 4 Liters

Want to try again with a different set of selections?

Start over with the button below

Start Over

For MSDS requests, please email technical@boysen.com.ph