Hudson®® Timbercoat Polyurethane Water-based Wood Coating

Hudson®® Timbercoat is a low-odor, single component waterborne non-yellowing urethane coating ideal for finishes on wood and parquet floors. It combines outstanding flexibility, good abrasion resistance, and an elegant appearance. It is formulated to resist common household detergents and chemicals.

Technical Data

Principal Uses

It is ideal for wooden floor parquets for residences and offices. It is formulated for interior and exterior wood works such as furniture, fixtures, cabinets, doors, and panels.

Vehicle Type

Polyurethane

Finish

Gloss, Semi-Gloss, and Matte

VOC
(±2.0 g/L)

Gloss: 122.1 g/L
Semi-Gloss: 120.9 g/L
Matte: 122.2 g/L

Dry Time

Recoat: 1-2 hours
Full Cure: 7 days

*Measured at 25°C and 50% relative humidity

Density
(±0.05 kg/L)

1.03 kg/L

Theoretical Coverage

35-45 sq. m.
* per 3.5-Liters at 25-30 microns

*Depending on surface texture and porosity

Tinting

Do not tint.

Clean-up
Solvent

Water

Packaging

3.5 Liters

Application

By brush or spray

APPLICATION SCHEDULE

Thoroughly mix the product then apply the first coat. The first coat acts as a sealer.

Let it dry for an hour then lightly sand surface.

Apply another coat of Timbercoat.

Lightly sand after an hour.

Apply two or more coats of Timbercoat.

Full curing develops after 7 days.

SURFACE PREPARATION

Properly prepare surface to be treated by using 80-100 grit sandpaper. For final sanding, use a 400 grit sand paper. Clean surfaces thoroughly manually or by using a vacuum cleaner and then wipe with a dry cloth.

For repainting previously coated floors, make sure that the surface is free from wax or any kind of oily residues.

SERVICE CONDITIONS

Do not use Hudson®® Timbercoat over alkyd-based wood fillers & wood stains.

Tannin naturally appears in some wood species. Finished results may vary depending on wood species.

For MSDS requests, please email technical@boysen.com.ph