Wood 
 
Interior:
Wood Varnish
 
 
New
 
 
Hudson®® Timbercoat Polyurethane
Water-based Wood Coating
 
 
Wood 
 
Interior:
Wood Varnish
 
 
New
 
 
Hudson®® Timbercoat Polyurethane
Water-based Wood Coating
 
 

Hudson®® Timbercoat Polyurethane Water-based Wood Coating

Hudson®® Timbercoat is a low-odor, single component waterborne non-yellowing urethane coating ideal for finishes on wood and parquet floors. It combines outstanding flexibility, good abrasion resistance, and an elegant appearance. It is formulated to resist common household detergents and chemicals.

SURFACE PREPARATION

Use only kiln-dried wood.
Properly prepare surface to be treated by using 80-100 grit sandpaper. For final sanding, use a 400 grit sand paper.
Dust off surfaces completely then wipe with a clean rag.

PAINTING SCHEDULE

Thoroughly mix the product for 15 to 20 seconds, then apply the first coat. The first coat acts as a sealer.

Let it dry for an hour then lightly sand surface.

Apply another coat of Timbercoat.

Lightly sand after an hour.

Apply two or more coats of Timbercoat.

NOTES

Allow the product to cure for 3 days for foot traffic abrasion and 7 days for heavy-duty use.

SERVICE CONDITIONS

Do not use Hudson®® Timbercoat over alkyd-based wood fillers & wood stains.
Tannin naturally appears in some wood species. Finished results may vary depending on wood species.
SQM
Paint SystemProductQuantity
SealerHudson®® Timbercoat6L
TopcoatHudson®® Timbercoat9.0L
* Quantity shown will only be an estimate
  1 Gallon = 4 Liters
Want to try again with a different set of selections?
Start over with the button below
For MSDS requests, please email technical@boysen.com.ph