Konstrukt™ Permaplast™ K-231 Deco Render
Konstrukt™ Permaplast™ K-231 Deco Render is an acrylic, polymer-based exterior wall coating that is combined with various sizes of aggregates to impart a textured finish.
Technical Data
Form
Slurry
VOC
(±2.0 g/L)
0 g/L
Dry Time
Skins over in approximately 30 minutes,
becomes firm overnight
becomes firm overnight
*Measured at 25°C and 50% relative humidity
Theoretical Coverage
Approx. 10-13 sq. m. per pail
*Depending on surface texture and porosity
Clean-up
Solvent
Water
Packaging
4-Liters and 16-Liters
Application
By stainless steel trowel
SURFACE PREPARATION
Make sure that the surface is clean and dry, free from oil, grease, dust, dirt, and other foreign matter.
APPLICATION SCHEDULE
Apply K-231 Deco Render onto the substrate by using a stainless steel trowel.
The finish should be troweled lightly to the thickness of the largest aggregate.
If a circular texturing is desired, use a trowel or float.
Maintaining a wet edge float finishes 5-8 minutes after the initial application.
Let the product cure overnight prior to the application of a topcoat.
The finish should be troweled lightly to the thickness of the largest aggregate.
If a circular texturing is desired, use a trowel or float.
Maintaining a wet edge float finishes 5-8 minutes after the initial application.
Let the product cure overnight prior to the application of a topcoat.
For MSDS requests, please email technical@boysen.com.ph