Nation™ Red Oxide Metal Primer NS-610

Nation™ Red Oxide Metal Primer is an economy-line rust inhibiting primer for steel substrates. It provides good corrosion resistance for metal surfaces.

Technical Data

Principal Uses

It is ideal as a primer for exterior and interior steel

Vehicle Type

Alkyd

Dry Time

Touch: 2 hours
Recoat: 12 hours

*Measured at 25°C and 50% relative humidity

Density
(±0.05 kg/L)

1.27 kg/L

Theoretical Coverage

25-30 sq. m.
* per 4-Liters at 1.7-1.4 mils DFT

*Depending on surface texture and porosity

Thinning
Solvent

Thin with not more than 1-Liter of BOYSEN®® Paint Thinner B‑0340 per 4-Liter can of NATION alkyd enamel products.

Clean-up
Solvent

BOYSEN®® Paint Thinner B‑0340

Packaging

1-Liter, 4-Liters, and 16-Liters

Application

By brush or roller

SURFACE PREPARATION

Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new galvanized surfaces, you may opt to etch the surface by applying 10% BOYSEN®® Metal Etching Solution B‑71 (Dilute 1 part of B‑71 to 9 parts water). Rinse with water and dry immediately.

Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.

For recoating pre-painted galvanized surfaces in good condition, sand lightly then wipe the surface with a clean rag before applying paint. Remove all loose paint film to sound surface. Spot prime bare substrate.

For corroded galvanized surfaces, remove rust by wire brushing and use BOYSEN®® Metal Etching Solution B‑71. Let it stay for 10-15 minutes. Be sure to remove all remaining residue. Immediately prime after drying.

PAINTING SCHEDULE

1st coat:
Nation™ Red Oxide Metal Primer NS-610

2nd & 3rd coat:
Nation™ Fast Dry Enamel or Nation™ Dura-Roof™

For MSDS requests, please email technical@boysen.com.ph